Panama Chock Deck Mounted for Ship Mooring Fitting

• Application: Boat, Yacht
• Standard: ASTM, GB, DIN, ANSI
• Customized: Customized
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: THYH-MC-104
• Surface Treatment: Baking Paint
• Material: Steel
• Type: Ring
• Transport Package: Steel Pallet
• Trademark: TIANHUA YIHE
• Origin: Qingdao, China
• Production Capacity: 10000PCS/Month

Product Description

China OEM Customized Bulwark Mounted Mooring Chock
 

Marine mooring chock has two types: deck mounted chock & bulwark mounted chock. The material is casting steel ZG230-450 normally. IACS approved quality to withstand all conditions. BV, ABS, LRS, DNVGL, RS, IRS, CCS, KR, NK is available. TianHua-marines could also provide you with a customized design with CAD drawings.

ISO13729 Closed Chock

The closed chock is made according to the standard of ISO 13729. It is normally applied for the ship which uses wire ropes. The radius of the closed chock surface was designed based on the bending ratio of rope through the chock of not less than twelve times the wire rope diameter. The closed chocks can also be classified into two types by its installation site including deck-mounted closed chock and bulwark mounted one.

 

ISO13728 Panama Chock

The Panama chocks are made according to the ISO 13728 standard and are normally adopted for ships passing through the Panama Canal, which are normally assisted by locomotives using steel towing wire. They meet normal mooring requirements and Panama Canal requirements. The nominal size the Panama chock is denoted by reference to the width of the opening, in millimetres, which are 310mm and 360mm. It can be classified as deck-mounted Panama chock and bulwark mounted one according to their installation site.

ISO13713 Mooring Chock

The mooring chock is made according to the ISO 13713 standard and is a type of ship's mooring and towing fitting installed on the shipside to lead the mooring and towing rope from the ship's inboard to outboard. The mooring chocks are normally adopted for ships which use nylon or other synthetic ropes rather than wire ropes considering the small bending ratio. It has two types depend on its installation including deck mounted one and bulwark mounted one.
 

Bulwark (EU Type) Towing Chock

Bulwark towing chock also known as EU type towing chock, is installed on the bulwark. It is made of cast steel. The surface of the towing chock is fine polished by 2-layer of shop primer anti-rust painting after sandblasting 2.5and well painted without any bur and the edge is to protect the towing ropes from broken during work. It is similar to NS 2589 chock, not often used in Asian ships.

DIN81915 Panama Chock

The Panama chock is made according to German Standard DIN 81915. The Panama chock, mounted on deck or bulwark, is closed chock which is used to control the position of mooring ropes. The material of the chock is GS-38 (material 1.0420) according to DIN1681 (cast steel). All the edges of the Panama chock must be ground smooth, especially where the rope is in contact with the chock. And it is required to be a blast and primed for the surface treatment. It is used for vessel, tug, cargo ship, military ship, industrial ships etc.

 

NS2587 Bulwark Mounted Mooring Chock

NS2587 bulwark mounted mooring chock sometimes also called NS2587 mooring pipe, follows the strict quality control system. Its surface is smooth without burs or sharp edges. It helps reduce the friction of the mooring rope. But this type of chock cannot satisfy the requirements of the Panama Canal Commission (PCC). For this chock, it has two optional nominal dimensions. Type A is a welded mooring chock. It is more often used in European countries than in Asia.
 

Deck Mounted Panama Chocks

Type	E	B1	D	H1	L1	L2	R1	R2	S1	S2	W1	W2
C2	158	315		200	360		100	57.5	12	6	160	115
C3	195	390		250	450		125	70	14	7	200	140
C5	240	480		300	550		150	90	16	8	250	180
C8	293	585		360	680		180	112	18	9	320	225
C12	355	710		440	840		220	135	20	10	400	270
C20	420	840		520	1020		260	160	22	11	500	320
C32	550	1100		700	1300		350	200	35	20	600	400
D3	195	390	40	250	450	140	125	70	14	7	200	140
D5	240	480	45	300	550	160	150	90	16	8	250	180
D8	293	585	50	360	680	180	180	112	18	9	320	225

Packaging & Shipping

Company Certification

Customers Visit Us

FAQ

Q1: Are you trading company or manufacturer ?
A: We are a manufacturer engaging in the field of metal products for more than 20 years.

Q2:How much is the freight ?
We will decide according to your mode of shipping and quantity, it needs you to provide us specific mode of transportation(by sea or air),which port or airport to arrive at.

Q3: Do you accept retail order? What is the MOQ required?
A: Yes, we accept retail order. MOQ is negotiable, free to contact us for discussion.

Q4: Do you provide ODM/OEM service?
A:Yes. OEM&ODM is available, you can show us the design plan, and it is better to ship us your original sample.
From the concept to finished goods, we do all (design, prototype reviewing, tooling and production) in the factory.

Q5:Can you provide samples?
A:Yes. We can ship your sample via DHL, UPS, Fedex, TNT, EMS etc. Please feel free to contact us for details